Load data for .308 Marlin Express + .308 | 110gr | Speer RN

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 110gr \| Speer RN
Manufacturer SKU:	1845
Bullet Weight:	110gr \| 7.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.645" \| 16.4mm
Caliber:	.308 Marlin Express load data
Case Length (l3):	1.910" \| 48.5mm
Cartridge Length (C.O.L.):	2.433" \| 61.8mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	47863 psi \| 3300 bar
LID:	LID_B6139_C397
Last updated:	2025-01-01

Load data for 78 loads in caliber .308 Marlin Express with .308 | 110gr | Speer RN bullet and 39 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	86%	42279	88%	**36	100%
ADI AR 2219	<<locked>>	90%	42380	89%	**82	96%
Accurate 2015	<<locked>>	95%	42192	88%	**49	98%
[Accurate 2460]*	<<locked>>	94%	42975	90%	**63	93%
Accurate 2495	<<locked>>	97%	35331	74%	**94	96%
[Accurate 2520]*	<<locked>>	97%	38711	81%	**27	93%
Alliant AR-Comp 👍	<<locked>>	97%	39030	82%	**72	99%
Alliant Reloder-10x 👍	<<locked>>	93%	43076	90%	**89	99%
Alliant Reloder-7	<<locked>>	85%	42917	90%	**13	99%
Baschieri & Pellagri 106	<<locked>>	89%	42337	88%	**67	97%
[Hodgdon Benchmark]*	<<locked>>	94%	42395	89%	**94	92%
[Hodgdon CFE BLK]*	<<locked>>	85%	42119	88%	**35	91%
Hodgdon H322	<<locked>>	95%	42380	89%	**82	96%
Hodgdon H335	<<locked>>	90%	42859	90%	**86	95%
Hodgdon H4198	<<locked>>	86%	42090	88%	**58	96%
Hodgdon TrailBoss	<<locked>>	97%	30153	63%	**67	100%
[IMR 3031]*	<<locked>>	96%	33359	70%	**18	94%
IMR 4198 👍	<<locked>>	91%	43033	90%	**43	99%
[IMR 8208 XBR]*	<<locked>>	97%	42380	89%	**36	91%
[Lovex D073.4]*	<<locked>>	92%	42641	89%	**33	93%
[Lovex D073.5]*	<<locked>>	94%	42627	89%	**49	93%
Norma 200 👍	<<locked>>	88%	42511	89%	**59	99%
[Norma 202]*	<<locked>>	96%	37463	78%	**77	93%
ReloadSwiss RS 14	<<locked>>	95%	29124	61%	**93	100%
[ReloadSwiss RS 40]*	<<locked>>	93%	42728	89%	**63	94%
Rottweil R 901	<<locked>>	97%	42221	88%	**46	95%
SNPE Vectan BA6 1/2	<<locked>>	83%	42366	89%	**87	100%
SNPE Vectan SP 10	<<locked>>	89%	42438	89%	**76	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	41104	86%	**54	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	33083	69%	**74	93%
[Somchem S321]*	<<locked>>	95%	43033	90%	**82	92%
Somchem S335	<<locked>>	97%	39914	83%	**51	95%
Vihtavuori N120	<<locked>>	88%	42438	89%	**97	100%
Vihtavuori N130	<<locked>>	94%	42656	89%	**07	99%
Vihtavuori N133	<<locked>>	97%	37695	79%	**15	97%
[Vihtavuori N140]*	<<locked>>	96%	35244	74%	**85	93%
[Vihtavuori N530]*	<<locked>>	95%	42685	89%	**66	92%
[Vihtavuori N540]*	<<locked>>	97%	35288	74%	**12	92%
[Winchester 748]*	<<locked>>	96%	43047	90%	**09	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	35824	75%	**02	100%
[ADI AR 2219]*	<<locked>>	81%	31749	66%	**13	92%
[Accurate 2015]*	<<locked>>	81%	26687	56%	**56	93%
[Accurate 2460]*	<<locked>>	88%	35056	73%	**85	90%
[Accurate 2495]*	<<locked>>	85%	23235	49%	**43	90%
[Accurate 2520]*	<<locked>>	92%	32866	69%	**89	90%
[Alliant AR-Comp]*	<<locked>>	81%	23975	50%	**10	93%
Alliant Reloder-10x	<<locked>>	81%	29849	62%	**64	95%
Alliant Reloder-7	<<locked>>	81%	37550	78%	**99	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	33054	69%	**51	94%
[Hodgdon Benchmark]*	<<locked>>	89%	36361	76%	**56	90%
[Hodgdon CFE BLK]*	<<locked>>	82%	38856	81%	**62	90%
[Hodgdon H322]*	<<locked>>	83%	29124	61%	**31	90%
[Hodgdon H335]*	<<locked>>	82%	31734	66%	**07	90%
[Hodgdon H4198]*	<<locked>>	81%	36027	75%	**17	94%
Hodgdon TrailBoss	<<locked>>	81%	23351	49%	**03	100%
[IMR 3031]*	<<locked>>	90%	27311	57%	**31	90%
IMR 4198	<<locked>>	81%	32111	67%	**74	97%
[IMR 8208 XBR]*	<<locked>>	94%	38812	81%	**61	90%
[Lovex D073.4]*	<<locked>>	87%	35563	74%	**76	90%
[Lovex D073.5]*	<<locked>>	89%	35549	74%	**89	90%
Norma 200	<<locked>>	81%	33910	71%	**62	98%
[Norma 202]*	<<locked>>	90%	30748	64%	**90	90%
ReloadSwiss RS 14	<<locked>>	81%	23279	49%	**45	100%
[ReloadSwiss RS 40]*	<<locked>>	86%	34301	72%	**59	90%
[Rottweil R 901]*	<<locked>>	87%	31140	65%	**64	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	39378	82%	**41	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	32010	67%	**23	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	30748	64%	**95	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	28877	60%	**56	90%
[Somchem S321]*	<<locked>>	91%	37782	79%	**64	90%
[Somchem S335]*	<<locked>>	85%	28181	59%	**52	90%
Vihtavuori N120	<<locked>>	81%	33591	70%	**13	100%
[Vihtavuori N130]*	<<locked>>	81%	28340	59%	**62	94%
[Vihtavuori N133]*	<<locked>>	83%	24903	52%	**48	90%
[Vihtavuori N140]*	<<locked>>	91%	30313	63%	**51	90%
[Vihtavuori N530]*	<<locked>>	93%	39015	82%	**84	90%
[Vihtavuori N540]*	<<locked>>	93%	31488	66%	**07	90%
[Winchester 748]*	<<locked>>	91%	37217	78%	**64	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.